產品名稱：聖戈班TYGON E-1000超柔軟管AAU00007
產品型號：
產品報價：
產品特點：聖戈班TYGON E-1000超柔軟管AAU00007超柔軟管TYGON超柔軟管耐一係列的水性化學藥品，並在使用腐蝕性化學品時可以很好的代替矽膠管。該軟管的Z低耐壓縮性允許其用於低扭矩泵中，包括蓄電池驅動類型。TYGON超柔軟管在溫度為-73℃時仍能保持柔韌性。其光滑的內腔更加便於清潔，並有助於防止積聚。請不要高壓滅菌。邵氏硬度A為40。符合FDA和NSF 51標準
聖戈班TYGON E-1000超柔軟管AAU00007的詳細資料：
Flexible, Food & Beverage Dispensing Tubing
Soft and flexible, Tygon E-1000 peristaltic pump tubing delivers superior performance in a formulation that contains non-DEHP [Bis (2-ethylhexyl) phthalate] plasticizers. Tygon E-1000 is non-DEHP and has been tested rigorously to meet stringent standards for low temperature and corrosive chemical resistance.
An excellent solution to applications requiring complicated set-ups with sharp radius curves and multiple directional changes, TygonE-1000 tubing for food & beverage dispensing resists twisting and collapse, which are common problems when using other tubing products. Tygon E-1000 tubing stays flexible at temperatures as low as -67°F (-55°C).
The extremely low durometer (40) of Tygon E-1000 tubing provides minimal resistance to compression. This feature is ideal when using low-torque or batterydriven peristaltic pumps. Tygon E-1000 tubing provides an excellent alternative to silicone tubing where corrosive chemicals are used.
Features and Benefits
Soft and flexible
Low-temperature resistant -67°F (-55°C)
Resistant to corrosive chemicals
Low durometer for use in low-torque pump applications
Meets FDA requirements for food contact
Typical Applications
Peristaltic pumps
Vent and drain lines
| Property | ASTM Method | Value or Rating |
|---|---|---|
| Tensile Strength @ 200% Elongation., psi (mpa) | - | 1100 |
| Brittleness Temp. °F (°C) | - | -67 |
| Durometer Hardness (Shore A), 15 Sec | - | 40 |
| Maximum Recommended Operating Temp. °F (°C) | - | 52 |
| Specific Gravity | - | 1.1 |
| Tear Resistance Ib-f/in (kN/m) | - | 104 |
| Tensile Set. % | - | — |
| Ultimate Elongation | - | 435 |
| Water Absorption, % 24 hrs. @ 23°C | - | 0.29 |
| Regulation | |
|---|---|
| NSF-51 | |
| FDA | |
| OEHHA California's Proposition 65 |
產品特點：
TYGON超柔軟管耐一係列的水性化學藥品，並在使用腐蝕性化學品時可以很好的代替矽膠管。
該軟管的zui低耐壓縮性允許其用於低扭矩泵中，包括蓄電池驅動類型。
TYGON超柔軟管在溫度為-73℃時仍能保持柔韌性。
其光滑的內腔更加便於清潔，並有助於防止積聚。請不要高壓滅菌。
邵氏硬度A為40。
符合FDA和NSF 51標準
訂貨號：
| 型號 | 英製（內×外×壁，英寸） | 公製（內×外×壁，毫米） |
| AAU00003 | 1/16×3/16×1/16 | 1.6×4.8×1.6 |
| AAU00007 | 1/8×1/4×1/16 | 3.2×6.4×1.6 |
| AAU00012 | 3/16×5/16×1/16 | 4.8×8×1.6 |
| AAU00017 | 1/4×3/8×1/16 | 6.4×9.6×1.6 |
| AAU00019 | 1/4×1/2×1/8 | 6.4×12.7×3.2 |
| AAU00022 | 5/16×7/16×1/16 | 8×11.1×1.6 |
| AAU00027 | 3/8×1/2×1/16 | 9.6×12.7×1.6 |
| AAU00029 | 3/8×5/8×1/8 | 9.6×16×3.2 |
| AAU00036 | 1/2×5/8×1/16 | 12.7×16×1.6 |
| AAU00038 | 1/2×3/4×1/8 | 12.7×19.1×3.2 |
聖戈班TYGON E-1000超柔軟管AAU00007
聖戈班TYGON E-1000超柔軟管AAU00007
| 如果你對聖戈班TYGON E-1000超柔軟管AAU00007感興趣，想了解更詳細的產品信息，填寫下表直接與廠家聯係： |
上一篇：聖戈班Tygon E-70-V-CE tubing
下一篇：ACF00007聖戈班Tygon E-3603理化分析管ACF00007
